XS 650 Yamaha show the world your bike!.
Posts tagged as:
HD: www.vimeo.com Riding the bike I made. 6″ up, 2″ out, 40 degree + 3 degree trees, 250 rear tire. Frame and Front End are from designcycle/cycleone in Regina. Jackshaft system for the 250 tire designed and assembled by me, the shaft itself was made by a machinist from my CAD. Hi-res Photos: flickr.com
{ 25 comments }
Joe, Chase, and April of the 2X crew take a trip to Mikes XS to gather custom and performance parts for the XS 650 Street Tracker Build.
{ 3 comments }
Field meet drags 1986 I Still Have This Bike. 1976 to present.
{ 11 comments }
Just finishing up this long build. This was a first for me! thanks to lead fist cycles for making it happen. Check out the full build at www.myspace.com/jnystylz
{ 16 comments }
Re-Phased XS 650 Engine. Bored to 707CC, Ported and Polished head, Custom intakes, Port Matched Carbs and Intakes, Dual Lectron Flatslide carbs 34MM, Custom Pamcopete Ignition (all electric baby!!!) 277 Degrees of Re-Phase, all done by myself. Just got it running in this video, needs tuning and timing, a bit rich still, but seems to run fine otherwise.
{ 25 comments }
1976 yamaha xs 650 bobber
{ 14 comments }
This is the first test ride of Mike V’s manical chopper creation “Holy Terror.” Unfortunately the bike doesn’t yet have any paint or finishing work done at this stage and the other “show tank” with the huge hole cut through is still in the stages of being chromed at this time. So, what you are seeing here is the bike in its first “raw” running form. A huge thanks goes out to Dennis Miller for making this all possible, this was filmed at his garage where the bulk of the work on this bike had taken place. Dennis put in over 125 HOURS of work on this bike project alone,…..I won’t even say how many hours I’ve put in,….but it’s been a 9 month long project and the bike is almost done. THANK GOD!
{ 5 comments }
www.bertaut.com
{ 18 comments }
This is my first attempt at chopping a Yamaha xs650. Its a 1979 with a tcbros hardtail and forward controls, old ford tail light, softail head light, West eagle seat, and welded on sportster slash cut pipes. Still uses points ignition but seems to run good. I have a 1980 XS650 in the works right now, im thinking somthing low. More of a chopper than a bobber
{ 25 comments }
This is a cold start on a 1975 yamaha xs650b all original bike except the handlebars; i have the original ones i just like these better. Bike only has 12000 miles on it; its never had any engine work. like i said. all original.
{ 25 comments }
